YOUR BIKE. YOUR RULES. YOUR SAFETY.

The ezCAN plugs directly into your bike and listens to CAN-bus. It provides you with a highly configurable, seamless plug and play solution to add accessories to your bike without the need to cut any wires that could void your warranty!

The power to manage your accessories safely.

The HEX ezCAN accessory manager lets you add and configure accessories with ease and without cutting any wires. It’s simple and easy to fit additional lights, an air horn, accessories and emergency brake lights that make the bike safer to ride.

Customise your bike and make it safer to ride.

Previous
Next

KEY FEATURES.

  • One device manages everything
  • Integrated control
  • Integrates additional safety features
  • Does not void warranty
  • Plugs directly into CAN-Bus
    (saves installation time and wiring complexity)
  • Unobtrusive – fits perfectly under the seat
  • Easy configuration of software via USB
    (Mac and Windows PC)
  • Four individually electronically fused channels
  • Waterproof and dust-proof

Preview some of the ezCAN's
Light Configurations

EASY INSTALLATION.

  1. Download and install the configuration software
  2. Install the ezCAN under the seat or side panel
  3. Route and connect the ezCAN battery cables
  4. Route and plug the ezCAN into the motorcycle
    CAN-bus

  5. Plug accessories into the ezCAN and configure via USB (Mac or Windows PC)

Watch a Demo of an ezCAN
Installation Now

SPECIFICATIONS & COMPONENTS.

ezCAN for BMW Bikes Gen II
  1. Waterproof micro USB connector
  2. Battery connection and fuse
  3. Two CAN-Bus connectors
  4. Four high-power outputs (10A continuous per channel/ 25A, max 20 seconds) – total of all channels cannot exceed 25A continuous
  5. Horn input connector (Only for the R1200 & F800 variants)
For the connector specifications please refer to our BMW specific FAQs. ezCAN for BMW Gen I
  1. Waterproof micro USB connector
  2. Battery connection and fuse
  3. Two CAN-Bus connectors
  4. Two high-power outputs (10A continuous / 25A, max 20 seconds)
  5. Two low-power outputs (4A continuous)
  6. Horn input connector (Only for the R1200 & F800 variants)
For the connector specifications please refer to our BMW specific FAQs.
  1. Waterproof micro USB connector
  2. Battery connection and fuse
  3. CAN-Bus connector
  4. Four high-power outputs (10A continuous per channel/ 25A, max 20 seconds) – total of all channels cannot exceed 25A continuous

For the connector specifications please refer to our Harley Davidson specific FAQs.

  1. Waterproof micro USB connector
  2. Battery connection and fuse
  3. Male & Female Diagnostic port connector
  4. Four high-power outputs (10A continuous per channel/ 25A, max 20 seconds) – total of all channels cannot exceed 25A continuous
For our connector specifications please refer to our KTM specific FAQS.

MODELS SUPPORTED BY THE ezCAN.

Click here for the list of BMW models supported.

Click here for the list of Harley Davidson models supported.

Click here for the list of KTM models supported.

Previous
Next

The ezCAN Software Enables Unparalleled Configurability.

YOUR ACCESSORIES. YOUR LIGHTS. YOUR SAFETY. YOUR WAY.

Customisation & Configurability is a Click Away.

EMERGENCY BREAK SEQUENCES. CALIFORNIA LEGAL FLASHING. STROBE WITH HORN. MODULATION.
and so much more...
Click Here To Learn More About the ezCAN Software